QUOTE
Compactor Wheel for Excavator | Bonovo
Compactor Wheel for Excavator | Bonovo
Compactor Wheel for Excavator | Bonovo
Compactor Wheel for Excavator | Bonovo
Compactor Wheel for Excavator | Bonovo
Compactor Wheel for Excavator | Bonovo

Compactor Wheel for Excavator

excavator compactor wheels are excavator attachments that can replace the vibrating compactor for compaction works. It has a simpler structure than the vibrating compactor, is economical, durable, and has a low failure rate. It is a compaction tool with the most original mechanical properties.

The Bonovo compaction wheel has three separate wheels with pads welded to the circumference of each wheel. These are held in place by a common axle and the excavator hanger brackets are fixed to bushed brackets between the wheels set to the axles. This means the compaction wheel is quite heavy and contributes to the compaction process which reduces the power needed from the excavator to compact the terrain, completing the job with less passes. Quicker compaction not only saves time, operator costs and stress on the machine, but also reduces fuel consumption and maintenance costs.

The excavator compactor wheel is an excavator attachment used to compact loose materials such as soil, sand and gravel. It is usually installed on the excavator tracks or wheels. The excavator compaction wheel consists of a wheel body, bearings and compaction teeth. During operation, the compaction teeth crush soil, sand and gravel to make them dense.

Excavator compaction wheels are suitable for use on a variety of soil and loose materials, such as backfill, sand, clay, and gravel. Its advantages include:

Efficient compaction: The excavator compaction wheel has a large compaction force and can quickly compact various soils and loose materials to improve operating efficiency.

Strong adaptability: The excavator compaction wheel can be installed on the excavator tracks or wheels, and is suitable for various terrains and construction conditions.

Multiple uses: The excavator compaction wheel can be used not only for soil compaction, but also for the compression and crushing of rocks, branches and other materials.

Easy to operate: The excavator compaction wheel is easy to operate, and the compaction speed and compaction strength can be adjusted by controlling the excavator’s throttle and operating lever.

Excavator compaction wheels are usually made of high-strength materials, such as high-strength steel and wear-resistant materials, to ensure their durability and reliability. During use, you need to pay attention to keeping the wheel body clean and lubricated, and regularly inspect and maintain components such as bearings and compaction teeth to ensure its normal operation and extend its service life.

Compaction Wheel VIDEO

contact us


In order to achieve a more perfect flt, bonovo can customlze the size according to the needs of customers.

compactor wheel for excavator | BONOVO

1-40 Ton

MATERIAL

NM400

WORKING CONDITIONS

compact various soil layers and gravel, gravel and other fill materials
compactor wheel for excavator | BONOVO

Compaction Wheel

compaction wheel

Specification

Tonnage weight/kg Wheel width A/mm Wheel diameter B/mm Maximum working diameter C/mm Roller model D
1-2T 115 450 380 470 PC100
3-4T 260 450 380 470 PC100
5-6T 290 450 450 540 PC120
7-8T 320 450 500 600 PC200
11-18T 620 500 600 770 PC200
20-29T 950 600 890 1070 PC300
30-39T 1080 650 920 1090 PC400

Compaction wheel is an excavator attachment that can replace the vibrating compactor for compaction works. It has a simpler structure than the vibrating compactor, is economical, durable, and has a low failure rate. It is a compaction tool with the most original mechanical properties.

 

The compaction wheel is simple to install and easy to use, and can effectively compact various soil layers and gravel, gravel and other fill materials. It is especially suitable for relatively narrow construction sites that can not be reached by large compaction machines. It is often used for compaction of the bottom layer of roadbed or foundation pit backfill soil.When the compactor wheel is compacting the bottom layer of roadbed or foundation pit backfill, Excavator arm is the main power source to perform compaction operations.

 

The Bonovo compaction wheel has three separate wheels with pads welded to the circumference of each wheel. These are held in place by a common axle and the excavator hanger brackets are fixed to bushed brackets between the wheels set to the axles. This means the compaction wheel is quite heavy and contributes to the compaction process which reduces the power needed from the excavator to compact the terrain, completing the job with less passes. Quicker compaction not only saves time, operator costs and stress on the machine, but also reduces fuel consumption and maintenance costs.

 

The compaction wheel is mainly composed of: ear plate, wheel frame, wheel body and wheel block.

Details of our specifications

ROLLER

Roller

Use rollers instead of bearings to rotate the wheel body. Rollers are maintenance-free and have a longer service life than bearings. The size of the roller determines that the overall width of the compactor wheel will not be too large.

WHEEL compaction

wheel body

The wheel body of the compaction wheel is hollow designed to reduce the weight of the product.

The wheel body is made of two circular steel plates and a rolled plate into a circular arc plate welded on the supporting wheel. Triangular ribs are welded between the circular plate and the arc plate to reinforce the wheel body.

wheel block

wheel block

The wheel block is made of steel plate, which has the advantage of being strong and wear-resistant, but the disadvantage is that it is heavy and the overall weight of the product is heavy. Hollow castings can be used instead. Wheel block sorting can be customized according to customer requirements.